Henderson Plastics Ltd
Lyng Hall Road
Wood Norton
Dereham
Norfolk
NR20 5BJ
Tel: 01362 683 364
E-mail
Order Total:
Kitchen Worktop Template
for ¼" Routers
Order Total:
DIY Kitchen Worktop Jig for ¼" Routers
A simple to use kitchen worktop routing jig for use with ¼" routers
supplied complete with full instruction.
Professional quality accurate joints.
Made from tough and durable 6mm polypropylene
Ensures a smooth straight cut
Caters for 6 different worktop widths
300, 450, 500, 600, 618, & 650mm
Two connector bolt slots
3 nylon alignment pegs included
Almost all hobby and DIY routers are supplied with a guide bush as part of the acessories, however the guide bushes vary in diameter from suppler to supplier and in most cases they can't be used with the standard worktop router templates. We have overcome that problem by offering a range of low cost accurate kitchen worktop routing template jigs made to work with different sizes of guide bushes and ¼" router cutters.
To make sure you order the correct template check guide bush supplied with your ¼" router. Next measure the guide bush across the outside diameter of the short tube.
From the list below select the cutter and guide bush combination which matches with yours
For example, if your guide bush measures 17mm across then order WTJ17/25
We also supply extra long ¼" cutters, as joints have to be cut right through the worktop from one side
|
Code
|
Worktop Corner Mitre Template
|
£ |
|
|
WTJ10/25
|
|
Use with ¼" cutter and 10mm guide bush
|
|
|
WTJ12/25
|
Use with ¼" cutter and 12mm guide bush
|
|
|
|
WTJ14/25
|
Use with ¼" cutter and 14mm guide bush
|
|
|
|
WTJ16/25
|
Use with ¼" cutter and 16mm guide bush
|
|
|
|
WTJ17/25
|
Use with ¼" cutter and 17mm guide bush
|
|
|
|
WTJ18/25
|
Use with ¼" cutter and 18mm guide bush
|
|
|
|
WTJ24/25
|
Use with ¼" cutter and 24mm guide bush
|
|
|
|
WTJ25/25
|
Use with ¼" cutter and 25mm guide bush
|
|
|
|
WTJ30/25
|
Use with ¼" cutter and 30mm guide bush
|
|
|
How to Order
To make sure you order the correct template check the guide bush supplied with your ¼" router. Next measure the guide bush across the outside diameter of the short tube. From the list below, select the cutter and guide bush combination which matches yours.
For example, if your guide bush measures 17mm across, order WTJ17/25.
|
Description
|
Product
|
Comments
|
Price
|
|
|
Worktop Cutter
¼" TCT cutter with ¼" shank |
 |
Quarter inch cutter 82mm long
for ¼" collet |
£
|
|
|
Jig Carry Bag
for 720 template |
 |
Black polyester carry bag with handles
|
£
|
|
|
Solo Clamp
|
 |
Simple one handed operation
150mm jaw opening |
£
|
|
|
|
 |
150mm long
Zinc plated |
£
|
|
|
|
|
Joint sealer & laminate repair compound
|
£
|
| Worktop Corner Mitre Template | |||
|---|---|---|---|
| Code | Add to basket | ||
| WTJ10/25 | Use with ¼" cutter and 10mm guide | ||
| WTJ12/25 | Use with ¼" cutter and 12mm guide | ||
| WTJ14/25 | Use with ¼" cutter and 14mm guide | ||
| WTJ16/25 | Use with ¼" cutter and 16mm guide | ||
| WTJ17/25 | Use with ¼" cutter and 17mm guide | ||
| WTJ18/25 | Use with ¼" cutter and 18mm guide | ||
| WTJ24/25 | Use with ¼" cutter and 24mm guide | ||
| WTJ25/25 | Use with ¼" cutter and 25mm guide | ||
| WTJ30/25 | Use with ¼" cutter and 30mm guide | ||
| Description | Product | Price | Add to Basket |
|---|---|---|---|
| Worktop Cutter ¼" TCT cutter with ¼" shank |
|
£ | |
| Jig Carry Bag for 720 template |
 |
£ | |
| Solo Clamp 150mm jaw |  |
£ | |
| Connector Bolts 150mm long Zinc Plated |
 |
£ | |
| Colorfill Joint sealer and laminate repair compound |
|
£ | Choose Colour and Order |